The stacking extruder press is a precision pressurizing equipment used in new energy lithium battery PACK production lines. Its full name is cell module stacking extrusion press. Its function is to neatly stack multiple cells, apply precise and controllable pre-tightening pressure, eliminate cell gaps, correct alignment, and then bind steel strips to form a standard battery module. It is a core tooling equipment in the front-end of battery assembly.
Parameter of pressing machine
| No. | Item | Specification |
| 1 | Scope of use | Pressing machine for square battery module |
| 2 | Load cell required capacity | 1500N |
| 3 | Equipment travel | 200-1200mm |
| 4 | Servo motor | Mitsubish Electric |
| 5 | PLC | Mitsubish Electric |
| 6 | Regulation mode | Pressure adjustable, real-time display of pressure |
| 7 | Power source | 220V |
| 8 | Atmospheric pressure | 0.65mpa |
| 9 | Control mode | Manual control, one-click extrusion, release |
| 10 | Safety | Equipped with emergency stop switch and protection identifier |
|
11 |
After-sale Service |
For the buyer’s after-sales service needs, the seller s hall give solutions by phone or email within 24 hours. |
Process Flow
1.Place the battery and the end plate accessories in turn in the holding machine according to the regulations, and then press the lower press mechanism to press the battery.
2.After the placement is completed , the pre-set tensioning parameters are tightened through the switch button .
3.Wrap the front and rear steel belts after pressing.
4.After completion , the module is released by pushing the button .
5.Finally, the battery module is removed manually
